Commit bdc193

2026-04-13 09:45:02 cloudy-jc: Fix broken images on FreeCAD Extension page: use space not hyphen in path OtterWiki attachment paths must match the page name exactly. The directory is "FreeCAD Extension/" (space) but images were referenced as "/FreeCAD-Extension/" (hyphen), causing 404s. Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

FreeCAD Extension.md ..
@@ 14,7 14,7 @@
	FreeCAD is free, open source, and runs on Windows, Mac, Linux and Raspberry Pi. There is no account to make and nothing to pay for.
-	
+	
	*FreeCAD 1.0 in the Part Design workbench. The tree on the left shows every step used to build the model. Image by Maxwxyz, [CC BY 4.0](https://creativecommons.org/licenses/by/4.0/), via [Wikimedia Commons](https://commons.wikimedia.org/wiki/File:FreeCAD_1.0_Light_PartDesign_Pozidriv.png).*
@@ 46,7 46,7 @@
	Create a new sketch on the XY plane. Draw a circle, then add a **diameter constraint** and type the number — say, 80 mm for a hat that sits over a 72 mm Sphero. Constraints are what make FreeCAD parametric: the circle isn't just "about that big", it's exactly 80 mm, and FreeCAD remembers that rule. ([Sketcher docs](https://wiki.freecad.org/Sketcher_Workbench))
-	
+	
	*A sketch with constraints. The white dimension arrows lock the shape to exact measurements. CC0, via [Wikimedia Commons](https://commons.wikimedia.org/wiki/File:FreeCAD_PartDesign_Sketch.png).*
@@ 54,7 54,7 @@
	Close the sketch, then use **Pad** to push it upwards by 10 mm. You now have a solid puck — a flat cylinder. ([Pad docs](https://wiki.freecad.org/PartDesign_Pad))
-	
+	
	*After padding the sketch, you get a solid 3D shape. CC0, via [Wikimedia Commons](https://commons.wikimedia.org/wiki/File:FreeCAD_PartDesign_Pad.png).*